GWA-1 WCB Body Flanged Y Type Strainer

WCB Body Flanged Y Type Strainer is an indispensable filtering device for the pipeline systems for transporting medium. Y- Strainer is usually mounted at the inlet end of the Pressure Reducing Valve, Pressure releasing valve, water set level valve, or other devices, used to remove impurities in the medium, and to protect the normal use of the valves and equipment. When the fluid enters the filter cartridge with a certain size of the filter screen, its impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, as long as the removed filter cartridge is removed and re-mounted after treatment, so the use and maintenance are extremely convenient.

WCB Body Flanged Y Type Strainer is used in piping to remove the impurities from the transporting medium such as hot water, cold water, steam, compressed air, In particular, this Y-strainer should be installed before the circulating water pump in the boiler room

GWA-1 WCB Body Flanged Y Type Strainer Dimensions

Class	Size	d	L	D	D1	D2	H	b	n-φd
Class	DN	mm	mm	mm	mm	mm	mm	mm	n-φd
150Lb (2.0Mpa)	2"	50	203	152	120.7	92	205	16	4-19
	2-1/2"	65	216	178	139.7	105	230	18	4-19
	3"	76	241	190	152.4	127	255	19	4-19
	4"	100	292	229	190.5	157	300	24	8-19
	5"	125	356	254	215.9	186	350	24	8-22
	6"	150	406	279	241.3	216	390	26	8-22
	8"	200	495	343	298.5	270	450	29	8-22
	10"	250	622	406	362	324	580	31	12-26
	12"	300	698	483	431.8	381	640	32	12-26
	14"	335	787	533	476.3	413	720	35	12-29
	16"	385	914	597	539.8	470	900	37	16-29
	18"	435	978	635	577.9	533	1100	40	16-32
	20"	488	978	699	635	584	1225	43	20-32
	24"	590	1295	813	749.3	692	1335	48	20-35

WCB Body Flanged Y Type Strainer VS DI Body

1. Standard:

Both WCB body flanged Y type strainer and DI body flanged Y type are ASME, DIN, BS

2. Pressure:

Both WCB body flanged Y type strainer and DI body flanged Y type pressure are Class125/150, PN10/16

3. Range of Applications (Similarity):

Stardard: ANSI CLASS 125/150, DIN 3202 PN10/16

Face to face: ANSI CLASS 125/150, DIN 3202 F1

Connection flange type: Flange end

4. Installation (Similarity and Difference):

WCB and DI body flanged Y type Strainer is connected and operated in the same way, the WCB is suitable for harsher media.

GWA-1 WCB Body Flanged Y Type Strainer FAQs

Q How to Clean the Flanged Y Type Strainer?

When you clean the Flanged Y Type Strainer, firstly please close the valve in front of the filter, and then remove the valve cover to clean the debris attached to it, take out the filter screen, remove the debris, clean the filter screen, clean the valve body, assemble the filter and continue using it.

Q What is a Flanged Y Type Strainer Commonly Used For?

Flanged Y Type Strainer is widely used in Heating, Cooling, Ventilation systems, for water and agricultural purposes.