ZMIO-D41 DIN3352 F4 Flanged Gate Valves

DIN3352 is the production standard of the German-labeled valve, which includes metal sealing valves and soft sealing valves.

F4 is the structural length of the German-labeled valve, which is included in the DIN3202 standard, and the corresponding is F5. In contrast, the F4 structure length is shorter than F5.

ZMIO-D41 DIN3352 F4 Flanged Gate Valves Dimensions

Dimensions in inches and millimetres
Szie	L	D	K	n-d
Szie	L	PN10/PN16	PN10/PN16	PN10/PN16	H
DN40	140	150	110	4-18	275
DN50	150	165	125	4-18	297
DN65	170	185	145	4-18	329
DN80	180	200	160	8-18	357
DN100	190	220	180	8-18	414
DN125	200	250	210	8-18	507
DN150	210	285	240	8-22	575
DN200	230	340	295	8-22/12-22	756
DN250	250	395/405	350/355	12-22/12-26	894
DN300	270	445/460	400/410	12-22/12-26	1022
DN350	290	505/520	460/470	16-22/16-26	1150
DN400	310	565/580	515/525	16-26/16-30	1280
DN450	330	615/640	565/585	20-26/20-30	1420
DN500	350	670/715	620/650	20-26/20-33	1570
DN600	390	780/840	725/770	20-30/20-36	1730

DIN3352 F4 Flanged Gate Valves VS F5

1. Material:

Both body material of DIN3352 F4 flanged gate valve and DIN3352 F5 flanged gate valve can cast iron and ductile iron, and both them can be metal seated and resilient seated.

2. Pressure:

Both DIN3352 F4 flanged gate valve and DIN3352 F5 flanged gate valve pressure can be PN10/16.

3. Range of Applications (Similarity and Difference):

Stardard:DIN 3352

Face to face:DIN 3202 F4/F5

Connection flange type:DIN2543,DIN2544,DIN2545，DIN2546

4. Installation (Similarity and Difference):

Checking the type of gate valve used F4/F5 before installation, consider that the face to face length should be consistent with the project design, all suitable for the DIN standard management system

ZMIO-D41 DIN3352 F4 Flanged Gate Valves FAQs

Q 1. What is the Function for Valves?

The primary purpose of a valve is to direct and control the flow of fluids by starting, stopping, and throttling (restricting) flow to make processing possible.

Q 2. Can Gate Valves Be Installed at End of Line?

Gate valves are not designed for end of line duty. We also recommend the use of a suitability-rated blanking flange for such applications.